Tungsten Carbide Chain Maya 3/8" Full-Chisel Pro-Tipped (.050" .058" .063")

Maya 3/8" Full-Chisel Pro-Tipped Carbide Chainsaw Chain (.050" .058" .063")

Designed for dirty and abrasive cutting conditions where standard chain loses its edge quickly.

Pro-Tipped carbide uses brazed tungsten carbide tips on a full-chisel cutter for improved wear resistance in contaminated timber such as burnt wood, demolition material and storm debris.

Important: This chain is not designed for dense Australian hardwoods. For Ironbark, Red Gum, Grey Box or similar species, use Maya Endurance carbide.

Key Features

• Carbide-tipped cutters for extended edge life in dirty and abrasive timber.
• Full-chisel profile for fast cutting in lower density material.
• Designed for contamination including dirt, ash and embedded debris.
• Available in .050", .058" and .063" gauges.
• Pre-joined loop supplied ready to fit.

Specifications

Best Use

• Fire-damaged timber
• Storm debris and dirty logs
• Palms and rotten stumps
• Softwood and medium-density hardwoods

Not Recommended For

• Dense Australian hardwoods (Ironbark, Red Gum, Grey Box, Turpentine)
• High-load cutting with large saws
• Clean timber where a standard steel chain will cut faster

Sharpening & Maintenance

• Sharpen with diamond file or diamond grinding disc only.
• Maintain raker height at .025" (0.65 mm).
• Sharpen at the first sign of reduced cutting performance.
• Inspect regularly in abrasive conditions.

Running a carbide chain blunt increases heat and load on the brazed joint. This can lead to tip failure or detachment.

Important Usage Notes

• Do not force the chain through the cut
• Allow the chain to self-feed
• Avoid chain bounce and impact loading
• Keep chain sharp at all times

Safety

This is a non-safety chain with aggressive full-chisel cutters. For experienced operators only.

Country of Manufacture: China