Chainsaw Bar Guide
Bar mount information
Compare common bar mount codes, nominal mount sizes and model fitment before ordering a replacement guide bar.
Fitment check: bar mount, chain pitch, chain gauge and drive link count must match your saw setup.
Need help with chain sizing? Read our chain pitch & gauge guide.
Start Here
Use our finder or open a manufacturer reference in a new tab.
Mount Code Cross-Reference
Different brands can use different codes for the same bar mount. Use these cards as a quick reference.
Cannon C1 Combination Mount: Cannon’s C1 mount is a combination mount equivalent to Oregon A041, K041, A061, A064, A074, A095 and K095 mount patterns, and the Stihl 3005 mount.
Cannon states this mount fits most chainsaws on the market that are under 60cc. Confirm through the Cannon Bar Finder when ordering a Cannon bar.
Cannon C1 Combination Mount
Stihl 3003 Medium Mount
Husqvarna Large Mount
Husqvarna Small Mount
Stihl Small Mount
Echo Large Mount
Stihl Very Large Mount
Measurement refers to the nominal mount slot / bar stud size shown in manufacturer mount references. Always confirm the complete bar mount, pitch, gauge and drive link count before ordering.
Popular Bar Mounts
Jump to a mount below, then open the model list if needed.
D025 / SN / Stihl 3003 Mount
Codes: Oregon D025 | GB SN | Stihl 3003 | Cannon S1
Commonly fits many mid-sized 60–91cc Stihl chainsaws with 12mm bar studs.
View compatible Stihl models
Fits Stihl models:
024, 026, 027, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044, 045, 046, 048, 056, 064, 066, E15, E20, E220C, FARMBOSS, MS260, MS270, MS271, MS280, MS290, MS310, MS360, MS361, MS380, MS381, MS390, MS400, MS440, MS460, MS461, MS462c, MS500i, MS650, MS660, MS661
D009 / HV Mount
Codes: Oregon D009 | GB HV | Cannon H1
Common 9mm mount used across Husqvarna, Jonsered, Makita and others.
View compatible models
DOLMAR: PS6400, PS7300, PS7900
HUSQVARNA: 1100, 160, 162, 163, 180, 181, 185, 2100XP, 2101, 260, 261, 263, 266, 268, 272, 280, 281, 285, 288XP, 298, 3120XP, 362XP, 365, 371XP, 372XP, 380, 385XP, 390XP, 394, 395XP, 480, 562XP, 570, 572, 575XP, 585, 592XP, 61, 62, 65, 66, 70, 77
JONSERED: 2063, 2065, 2071, 2077, 2083, 2094, 2095, 2156, 2159, 2163, 2165, 2171, 2186, 625, 630, 635, 670 WEST COAST
MAKITA: DCS6400, DCS6401, DCS7300, DCS7301, DCS7900, DCS7901
POULAN & POULAN PRO: 375, 395, 415, 425, 475, PP445, PP505, PP655
SHINDAIWA: 1091, 550, 575, 577, 680, 695, 757, 801, 901
SOLO: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
BAUMR-AG: SX92
K095 / UHL / UHLX Mount
Codes: Oregon K095 / A095 | GB UHL / UHLX | Cannon C1 / H5 / H6
Common mount family for mid-size Husqvarna platforms and included within Cannon’s C1 Combination Mount reference.
View compatible models
ALPINA: 600, 600i, 650, 660, P650, PROF 55, PROF 65, PROF 66
CASTOR: CP600, CP650
DOLMAR: 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 219, 6000, 6400, 6800, PS5000, PS5100, PS600
HUSQVARNA: 133, 140, 154, 234, 238, 240, 242, 246, 254, 257, 259, 261, 262, 33, 334T, 335XPT, 338XPT, 340, 340E, 345, 345E, 346XP, 550XP, 350, 350E, 351, 353, 357, 359, 360, 362, 40, 41, 42, 44, 444, 45, 455, 460, 49, 50, 51, 55, EL1200, EL1400, EL1500, EL16, EL400
MAKITA: DCS520, DCS5200i, DCS540, DCS5430, DCS5431, DCS60000i, DCS6800i, DS431
OLEO MAC & OLYMPIK: 956, 962, 971, 981, 985
BAUMR-AG: SX62
A074 / SW / Stihl 3005 Mount
Codes: Oregon A074 / A061 / A064 | GB SW | Stihl 3005 | Cannon C1 / S5
Common mount for smaller Stihl and compatible saws, and included within Cannon’s C1 Combination Mount reference.
View compatible models
STIHL: 009, 010, 011, 012, 015, 017, 018, 019, 020, 021, 023, 025, E10, E14, E160, E180, MS170, MS180, MS190T, MS191, MS191T, MS192T, MS200, MS200T, MS210, MS250, MST190T
ALPINA: E1.6, E1.8, E160, E170, P360, P370, P390, S35, S40
CASTOR: CP360, CP370, CP380, EL160, EL170, HIT 1.6/1.8
EFCO: 114E, 116E, 117E, 119E, 132, 134, 135, 136, 138, 140, 141, 155E
OLEO MAC & OLYMPIK: 1700, 240, 241, 244, 344, 931, 935, E1900, OM-E200
E099 / SLD / Stihl 3002 Mount
Codes: Oregon E099 / E086 / D033 / E031 | GB SLD | Stihl 3002 | Cannon S2
Used on very large Stihl saws such as 070 and MS880 with 14mm bar studs.
View compatible Stihl models
STIHL: 050, 051, 070, 075, 076, 084, 088, 090, MS880, MS881
D176 / EX Mount
Codes: Oregon D176 | GB EX | Cannon P4
Common mount used across many larger Echo platforms.
View compatible models
ECHO: 60, CS451, CS452, CS500, CS5000, CS501, CS510, CS550, CS5500, CS5501, CS600, CS601, CS602, CS610, CS650, CS660, CS670, CS6700, CS6701, CS6702, CS701, CS702, CS706, CS750, CS8000, CS8001, CS801, CS802
GREEN MACHINE: 7600, 7700
JOHN DEERE: 50AV, 50V, 51SV, 55SV, 55V, 60V, 65, 65SV, 66SV, 70V, 800V, 8EV
REDMAX - ZENOAH: G56AVS, G621AVS
TAS-TANAKA: 505, 506, 650, 655
Not sure which mount you need? Contact us before ordering and we can help check the correct bar mount, pitch, gauge and drive link count.