Archer 3/8" Ripping Full Chisel Chain – Standard & Skip-tooth

Archer 3/8" Ripping Full-Chisel Chainsaw Chain

Built for chainsaw milling and ripping fence posts. Archer ripping full-chisel chain is designed for cutting along the grain, making it suitable for milling timber into slabs and boards, as well as ripping logs into fence posts.

Available in standard and skip-tooth configurations, with .058" and .063" gauge options and a wide range of drive-link counts.

Choose Your Cutting Sequence

Standard Ripping Full-Chisel
Conventional cutter spacing with a full complement of cutting teeth for chainsaw milling and ripping fence posts.

Skip-Tooth Ripping Full-Chisel
Features an additional drive link between each cutter, creating wider spacing between the cutting teeth. The reduced number of cutters provides additional chip clearance, particularly useful when milling with longer guide bars and making wider cuts.

Specifications

• Brand: Archer
• Pitch: 3/8" standard
• Cutter: Ripping Full-Chisel
• Cutting sequence: Standard or Skip-Tooth
• Gauge: .058" (1.5 mm) or .063" (1.6 mm)
• Drive links: Select your required count
• Application: Chainsaw milling, timber slabs, boards and ripping fence posts

Choosing the Correct Chain

Select your preferred cutting sequence, gauge and drive-link count from the options above.

Before ordering: Confirm that the chain pitch matches your drive sprocket and guide-bar nose sprocket, the gauge matches your bar groove, and the drive-link count matches your milling setup. This is standard 3/8" chain, not 3/8" Low Profile.

Sharpening: Ripping chain requires the correct ripping-grind angle. Confirm the manufacturer's specifications before sharpening.

Unsure which chain suits your milling setup? Contact Whites Forestry Equipment for assistance before ordering.