Sugi Hara Professional Chainsaw Bar SN, D025
Sugihara chainsaw bars have been produced in Japan since 1957 by Hideo Sugihara and his family. During production, the steel is heat treated up to four times for superior strength and performance. This hardening process yields a hardness rating of HRC60, making the bars highly durable and longer lasting than comparable brands. Sugihara remains the go-to choice for professionals using high powered chainsaws.
- Pitch: .325", 3/8" or .404" (check your chainsaw)
- Gauge: .063" 1.6mm
- Length: select from drop-down menu
- Mount: 12mm, CD, SN, D025
Mount fits Stihl chainsaws listed below
Tip! "check your drive sprocket" models listed were often factory fitted with different pitch sprockets. Mixing pitchs damages sprockets and voids warranty.
STIHL: 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044, 045, 046, 048, 500i, 056, 064, 066, E15, E20, E220C, FARMBOSS, MS260, MS270, MS280, MS290,MS291, MS310, MS311, MS360, MS361, MS362C, MS380, MS381, MS390, MS391, MS440, MS460, MS461, MS462C, MS500i, MS650, MS660, MS661, MSE220C
| #Part | Length | Gauge | Pitch | Drive Link | Weight |
| ST2T-3J40-A | 16" | .063" | .325" | 67 | |
| ST2T-3Q40-A | 16" | .063" | 3/8" | 60 | |
| ST2T-3Q45-A | 18" | .063" | 3/8" | 66 | |
| ST2T-3Q50-A | 20" | .063" | 3/8" | 72 | |
| ST2T-3Q63-A | 25" | .063" | 3/8" | 84 | |
| ST2T-3S63-A | 25" | .063" | .404" | 77 | |
| ST2T-3Q76-A | 30" | .063" | 3/8" | 98 | |
| ST2T-3Q90-A | 36" | .063" | 3/8" | 114 | |
| ST2T-3Q105-A | 42" | .063" | 3/8" | 135 |
You may also like
More from GA Spares
More from Sugihara Chainsaw Bars
Recently viewed